Source File
	utf8.go

Belonging Package
	runtime

// Copyright 2016 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package runtime

// Numbers fundamental to the encoding.
const (
	runeError = '\uFFFD'     // the "error" Rune or "Unicode replacement character"
	runeSelf  = 0x80         // characters below runeSelf are represented as themselves in a single byte.
	maxRune   = '\U0010FFFF' // Maximum valid Unicode code point.
)

// Code points in the surrogate range are not valid for UTF-8.
const (
	surrogateMin = 0xD800
	surrogateMax = 0xDFFF
)

const (
	t1 = 0x00 // 0000 0000
	tx = 0x80 // 1000 0000
	t2 = 0xC0 // 1100 0000
	t3 = 0xE0 // 1110 0000
	t4 = 0xF0 // 1111 0000
	t5 = 0xF8 // 1111 1000

	maskx = 0x3F // 0011 1111
	mask2 = 0x1F // 0001 1111
	mask3 = 0x0F // 0000 1111
	mask4 = 0x07 // 0000 0111

	rune1Max = 1<<7 - 1
	rune2Max = 1<<11 - 1
	rune3Max = 1<<16 - 1

	// The default lowest and highest continuation byte.
	locb = 0x80 // 1000 0000
	hicb = 0xBF // 1011 1111
)

// countrunes returns the number of runes in s.
func countrunes(s string) int {
	n := 0
	for range s {
		n++
	}
	return n
}

// decoderune returns the non-ASCII rune at the start of
// s[k:] and the index after the rune in s.
//
// decoderune assumes that caller has checked that
// the to be decoded rune is a non-ASCII rune.
//
// If the string appears to be incomplete or decoding problems
// are encountered (runeerror, k + 1) is returned to ensure
// progress when decoderune is used to iterate over a string.
func decoderune(s string, k int) (r rune, pos int) {
	pos = k

	if k >= len(s) {
		return runeError, k + 1
	}

	s = s[k:]

	switch {
	case t2 <= s[0] && s[0] < t3:
		// 0080-07FF two byte sequence
		if len(s) > 1 && (locb <= s[1] && s[1] <= hicb) {
			r = rune(s[0]&mask2)<<6 | rune(s[1]&maskx)
			pos += 2
			if rune1Max < r {
				return
			}
		}
	case t3 <= s[0] && s[0] < t4:
		// 0800-FFFF three byte sequence
		if len(s) > 2 && (locb <= s[1] && s[1] <= hicb) && (locb <= s[2] && s[2] <= hicb) {
			r = rune(s[0]&mask3)<<12 | rune(s[1]&maskx)<<6 | rune(s[2]&maskx)
			pos += 3
			if rune2Max < r && !(surrogateMin <= r && r <= surrogateMax) {
				return
			}
		}
	case t4 <= s[0] && s[0] < t5:
		// 10000-1FFFFF four byte sequence
		if len(s) > 3 && (locb <= s[1] && s[1] <= hicb) && (locb <= s[2] && s[2] <= hicb) && (locb <= s[3] && s[3] <= hicb) {
			r = rune(s[0]&mask4)<<18 | rune(s[1]&maskx)<<12 | rune(s[2]&maskx)<<6 | rune(s[3]&maskx)
			pos += 4
			if rune3Max < r && r <= maxRune {
				return
			}
		}
	}

	return runeError, k + 1
}

// encoderune writes into p (which must be large enough) the UTF-8 encoding of the rune.
// It returns the number of bytes written.
func encoderune(p []byte, r rune) int {
	// Negative values are erroneous. Making it unsigned addresses the problem.
	switch i := uint32(r); {
	case i <= rune1Max:
		p[0] = byte(r)
		return 1
	case i <= rune2Max:
		_ = p[1] // eliminate bounds checks
		p[0] = t2 | byte(r>>6)
		p[1] = tx | byte(r)&maskx
		return 2
	case i > maxRune, surrogateMin <= i && i <= surrogateMax:
		r = runeError
		fallthrough
	case i <= rune3Max:
		_ = p[2] // eliminate bounds checks
		p[0] = t3 | byte(r>>12)
		p[1] = tx | byte(r>>6)&maskx
		p[2] = tx | byte(r)&maskx
		return 3
	default:
		_ = p[3] // eliminate bounds checks
		p[0] = t4 | byte(r>>18)
		p[1] = tx | byte(r>>12)&maskx
		p[2] = tx | byte(r>>6)&maskx
		p[3] = tx | byte(r)&maskx
		return 4
	}
}

The pages are generated with Golds v0.6.7. (GOOS=linux GOARCH=amd64)
Golds is a Go 101 project developed by Tapir Liu.
PR and bug reports are welcome and can be submitted to the issue list.
Please follow @Go100and1 (reachable from the left QR code) to get the latest news of Golds.